![]() ![]() Do not belay here, but instead continue up and L on large. In your case, the route was learned from 142.23.55.170 over 6weeks ago. Climb up and R on steep blocks, then corner, 5.3, to a large terrace with a rappel anchor on block. #ROUTING DESCRIPTOR BLOCK HOW TO HOW TO#The metric is 0, and the traffic shares 1 route(s), so there's not equal-cost-multipathing in this case.Īn example from EIGRP would be: sh ip ro 4.4.4.4 Routing entry for 4.4.4.4/32 Known via "eigrp 10", distance 90, metric 768, type internal Redistributing via eigrp 10 Last update from 10.23.23.3 on FastEthernet0/1, 00:08:39 ago Routing Descriptor Blocks: 10.23.23.3, from 10.23.23.3, 00:08:39 ago, via FastEthernet0/1 Route metric is 768, traffic share count is 1 Total delay is 30 microseconds, minimum bandwidth is 10000 Kbit Reliability 255/255, minimum MTU 1500 bytes Loading 1/255, Hops 2 * 10.12.12.1, from 10.12.12. Routing Descriptor Block How To - lynxaspoy Routing descriptor blocks describe the route, and they depend on the source/protocol the route was learned. Any other delimiter type causes the list to be ignored without a warning or error message. In your case, the route was learned from 142.23.55.170 over 6weeks ago. The DC-02 and HQ-02 routers each send an aggregate address for its site. Note: The implied deny ingress firewall rule blocks all inbound communication, even from other instances in the same VPC network. Routing descriptor blocks describe the route, and they depend on the source/protocol the route was learned. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |